Functions

Text

• concat(source1: TEXT, source2: TEXT)TEXT

  Combine two separate texts into one.

  • Example:concat("hello", "world")"helloworld"
• indexOf(source: TEXT, searchValue: TEXT)NUMBER

  Find the starting position of a keyword in a text. If the keyword isn't present in the text, the returned value is -1.

  • Example:indexOf("hello world", "world")6
  • Example:indexOf("hello world", "hello")0
  • Example:indexOf("hello world", "goodbye")-1
  • Use indexOf for use cases like email validation. See use case example.
• length(source: TEXT)NUMBER

  Count the number of characters in a text.

  • Example:length("hello")5
  • Example:length("helloworld")10
  • Example:length("hello world")11
  • Use length for use cases like password validation. See use case example.
• lowerCase(source: TEXT)TEXT

  Convert any text from uppercase to lowercase

  • Example:lowerCase("Hello")"hello"
• upperCase(source: TEXT)TEXT

  Convert any text from lowercase to UPPERCASE.

  • Example:upperCase("Hello")"HELLO"
• left(source: TEXT, count: NUMBER)TEXT

  Extract a part of a text from the left side based on a specific number of characters.

  • Example:left("hello", 3)"hel"
• right(source: TEXT, count: NUMBER)TEXT

  Extract a part of a text from the right side based on a specific number of characters.

  • Example:right("hello", 2)"lo"
• lpad(source: TEXT, length: NUMBER, pad: TEXT)TEXT

  Left-pad a text with another text, to a specific length.

  • Example:lpad("5", 2, "0")"05"
  • Example:lpad("5", 4, "0")"0005"
• rpad(source: TEXT, length: NUMBER, pad: TEXT)TEXT

  Right-pad a text with another text, to a specific length.

  • Example:rpad("5", 2, "1")"51"
  • Example:rpad("5", 6, "1")"511111"
• repeat(source: TEXT, count: NUMBER)TEXT

  Repeat a text a specific number of times.

  • Example:repeat("hello", 2)"hellohello"
  • Example:repeat("hello", 3)"hellohellohello"
• replace(source: TEXT, from: TEXT, to: TEXT)TEXT

  Replace a part of a text with another text.

  • Example:replace("helloworld", "world", "protopie")"helloprotopie"
  • Example:replace("goodbye, John", "goodbye", "thank you")"thank you, John"
• trim(source: TEXT)TEXT

  Remove whitespaces on both sides of a text.

  • Example:trim(" helloworld ")"helloworld"
  • Example:trim(" helloworld ")"helloworld"
• ltrim(source: TEXT)TEXT

  Remove whitespace from the left side of a text.

  • Example:ltrim(" helloworld ")"helloworld "
• rtrim(source: TEXT)TEXT

  Remove whitespace from the right side of a text.

  • Example:rtrim(" helloworld ")" helloworld"
• regexextract(source: TEXT, regular expression: TEXT)TEXT

  Extracts the first substrings of a text that match the provided regular expression.

  • Example:regexextract("Google Doc 101", "[0-9]+")"101"
  • Example:regexextract("The price today is $826.25", "[0-9]*\.[0-9]+[0-9]+")"826.25"
• regexreplace(source: TEXT, regular expression: TEXT, replacement: TEXT)TEXT

  Replaces part of a text string with a different text string using regular expressions.

  • Example:regexreplace("Google Doc 101", "[0-9]+", "777")"Google Doc 777"
  • Example:regexreplace("The price today is $826.25", "[0-9]*\.[0-9]+[0-9]+", "315.75")"The price is $315.75"
• parseJson(source: TEXT, key: TEXT)TEXT

  Parses a valid JSON string and returns the corresponding value.

  • Example:parseJson("{\"name\":\"John\", \"age\":30, \"car\":null}", "age")"30"
  • Example:parseJson("{\"name\":\"John\", \"age\":30, \"car\":null}", "name")"John"

  For example, let's consider parseJson(var, "key"). Here, var is the text variable that stores the JSON string, and "key" is the key to parse. The latter supports nested key calling and simple references to array-like objects via the . (dot) notation.

  The parseJson function greatly simplifies working with complex data structures in ProtoPie. Additionally, since most API responses are in JSON format, being able to use parseJson within Pies makes working with APIs much more straightforward.

  You can use the parseJson function to:

  • send JSON string to pies via Bridge apps in ProtoPie Connect (e.g., message: “AutomobileSignal”, value: “json string”).
  • store a value inside a Pie variable via the Receive trigger.
  • use the data values inside the JSON string.

  To learn more, take a look at this Pie example.

Math

• pow(source: NUMBER, exponent: NUMBER)NUMBER

  Calculate the result of the first number raised to the power of the second number.

  • Example:pow(2, 3)8
• sqrt(source: NUMBER)NUMBER

  Calculate the square root of a number. This doesn't work for negative numbers.

  • Example:sqrt(9)3
  • Example:sqrt(2)1.41
• min(source1: NUMBER, source2: NUMBER)NUMBER

  Extract the smallest of two numbers.

  • Example:min(0, 1)0
• max(source1: NUMBER, source2: NUMBER)NUMBER

  Extract the largest of two numbers.

  • Example:max(0, 1)1
• abs(value: NUMBER)NUMBER

  Return the absolute value of a number. In practice, this comes down to removing the negative sign in front of a number.

  • Example:abs(-1)1
  • Example:abs(5 - 25)20
• sign(value: NUMBER)NUMBER

  Check if a number is positive or negative. Return 1 if a number is positive. Return -1 if a number is negative. Return 0 if a number is 0.

  • Example:sign(5)1
  • Example:sign(-10)-1
  • Example:sign(0)0
• round(source: NUMBER)NUMBER

  Return the rounded value of a number.

  • Example:round(3.49)3
  • Example:round(1.5)2
  • Example:round(6.79)7
• floor(source: NUMBER)NUMBER

  Return the nearest whole number down.

  • Example:floor(1.5)1
  • Example:floor(2.99)2
• ceil(source: NUMBER)NUMBER

  Return the nearest whole number up.

  • Example:ceil(1.5)2
  • Example:ceil(4.3)5
• random()NUMBER

  a random decimal number between 0 and 1

  • Example:random()a random decimal number between 0 and 1
• random(min: NUMBER, max: NUMBER)NUMBER

  Return a decimal number randomly between two given numbers.

  • Example:random(1, 5)a random decimal number between 1 and 5
• randomInt(min: NUMBER, max: NUMBER)NUMBER

  Return a whole number randomly between two given numbers.

  • Example:randomInt(1, 5)a random whole number between 1 and 5
• radians(degrees: NUMBER)NUMBER

  Convert degrees to radians.

  • Example:radians(180)3.14 = π
  • Example:radians(90)1.57 = π / 2
• degrees(radians: NUMBER)NUMBER

  Convert radians to degrees.

  • Example:degrees($pi)180
  • Example:degrees($pi / 2)90
• sin(radian: NUMBER)NUMBER

  Calculate the sine of a number in radians.

  • Example:sin($pi / 2)1
  • Example:sin($pi / 6)0.5
• cos(radian: NUMBER)NUMBER

  Calculate the cosine of a number in radians.

  • Example:cos(0)1
  • Example:cos($pi / 2)0
• tan(radian: NUMBER)NUMBER

  Calculate the tangent of a number in radians.

  • Example:tan($pi / 4)1
  • Example:tan(0)0
• asin(x: NUMBER)NUMBER

  Calculate the arcsine (in radians) of x.

  • Example:asin(1)1.57 = π / 2
  • Example:asin(0.5)0.52 = π / 6
• acos(x: NUMBER)NUMBER

  Calculate the arccosine (in radians) of x.

  • Example:acos(1)0
  • Example:acos(0)1.57 = π / 2
• atan(x: NUMBER)NUMBER

  Calculate the arctangent (in radians) of x.

  • Example:atan(1)0.79 = π / 4
  • Example:atan(0)0
• atan2(y: NUMBER, x: NUMBER)NUMBER

  Calculate the arctangent (in radians) of x and y, also known as the angle in the Euclidean plane.

  • Example:atan2(1, 0)1.57 = π / 2
  • Example:atan2(1, 1)0.79 = π / 4

Color

• color(red: NUMBER, green: NUMBER, blue: NUMBER)COLOR

  Return a color value (hex color code) based on an RGB value.

  • Example:color(255, 255, 255)#FFFFFF
  • Example:color(255, 102, 97)#FF6661
• red(source: COLOR)NUMBER

  Return the red RGB parameter of a hex color code.

  • Example:red(#FF0000)255
  • Example:red(#008000)0
  • Example:red(#0000FF)0
• green(source: COLOR)NUMBER

  Return the green RGB parameter of a hex color code.

  • Example:green(#FF0000)0
  • Example:green(#008000)128
  • Example:green(#0000FF)0
• blue(source: COLOR)NUMBER

  Return the blue RGB parameter of a hex color code.

  • Example:blue(#FF0000)0
  • Example:blue(#008000)0
  • Example:blue(#0000FF)255

Type Conversion

• number(source: TEXT)NUMBER

  Convert a text to a number. This doesn't work if the text cannot be converted to a number.

  • Example:number("1234")1234
  • Example:number("94.27")94.27
• text(source: NUMBER)TEXT

  Convert a number to a text.

  • Example:text(1234)"1234"
  • Example:text(94.27)"94.27"
  • Example:text(1 + 3)"4"
• format(source: NUMBER, format: TEXT)TEXT

  Convert a number to a text with a certain format. # is a placeholder for whole numbers whereas 0 represents the fractional part.

  • Example:format(1234.567, "#")"1235"
  • Example:format(1234.567, "#,###")"1,235"
  • Example:format(1234.567, "#.###,00")"1.234,57"
  • Example:format(1234.567, "#,##.00")"12,34.57"
  • Example:format(1234.567, "#,###.00")"1,234.57"
• color(source: TEXT)COLOR

  Convert a text to a color value (hex color code). This doesn't work if the text doesn't have a hex color code structure.

  • Example:color("#FFFFFF")#FFFFFF

Layers

• layer(source: TEXT)LAYER

  Refer to a layer.

  • Use this as part of a formula or a different function.
• layer(source: TEXT).propertyTEXT or NUMBER

  Refer to a layer's property. Learn more about layer properties.

  • Example:layer("Rectangle 1").xx-coordinate of the layer called Rectangle 1
  • Example:layer("Oval 1").opacityOpacity of the layer called Oval 1
  • Example:layer("Input 1").textText in the input layer called Input 1
• parent(layerName: LAYER)LAYER

  Refer to the parent layer, e.g., a container or component.

  • Use this as part of a formula or a different function.
• parent(layerName: LAYER).propertyTEXT or NUMBER

  Refer to the parent layer's property. Learn more about layer properties.

  • Example:parent(`Rectangle 1`).xx-coordinate of Rectangle 1 its parent layer
  • Example:parent(`Oval 1`).opacityOpacity of Oval 1 its parent layer
• initial(layerName: LAYER, layerProperty: TEXT)TEXT or NUMBER

  Return the initial value (before any interactions) of a specific layer property. Learn more about layer properties.

  • Example:initial(`Rectangle 1`, "x")Initial x-coordinate of Rectangle 1
  • Example:initial(`Oval 1`, "opacity")Initial opacity of Oval 1
  • Example:initial(`Input 1`, "text")Initial text in Input 1

Relative Coordinates

• toLayerX(containerName: LAYER, x: NUMBER, y: NUMBER)NUMBER

  Convert a x coordinate relative to the screen into the corresponding x coordinate relative to a container or component. The coordinates of layers inside a container or component are by default relative to the container or component they are in.

  • For example, if you want to get the x coordinate relative to a container `Container 1` based on the position (100, 200) relative to the screen, use the following function:
  • toLayerX(`Container 1`, 100, 200)returns the x coordinate relative to `Container 1` based on the x coordinate `100` relative to the screen.
• toLayerY(containerName: LAYER, x: NUMBER, y: NUMBER)NUMBER

  Convert a y coordinate relative to the screen into the corresponding y coordinate relative to a container or component. The coordinates of layers inside a container or component are by default relative to the container or component they are in.

  • For example, if you want to get the y coordinate relative to a container `Container 1` based on the position (100, 200) relative to the screen, use the following function:
  • toLayerY(`Container 1`, 100, 200)returns the y coordinate relative to `Container 1` based on the y coordinate `200` relative to the screen.
• toScreenX(containerName: LAYER, x: NUMBER, y: NUMBER)NUMBER

  Convert a x coordinate relative to a container or component into the corresponding x coordinate relative to the screen. The coordinates of layers inside a container or component are by default relative to the container or component they are in.

  • For example, if you want to get the x coordinate relative to the screen based on the position (10, 20) relative to a container `Container 1` , use the following function:
  • toScreenX(`Container 1`, 10, 20)returns the x coordinate relative to the screen based on the x coordinate `10` relative to `Container 1`.
• toScreenY(containerName: LAYER, x: NUMBER, y: NUMBER)NUMBER

  Convert a y coordinate relative to a container or component into the corresponding y coordinate relative to the screen. The coordinates of layers inside a container or component are by default relative to the container or component they are in.

  • For example, if you want to get the y coordinate relative to the screen based on the position (10, 20) relative to a container `Container 1`, use the following function:
  • toScreenY(`Container 1`, 10, 20)returns the y coordinate relative to the screen based on the y coordinate `20` relative to `Container 1`.

Time & Date

Note: the time & date functions follow the ISO8601 format.

• timeNow()TEXT

  Retrieves the current time information.

  • Example:timeNow()17:44:50.123
• time(hour: NUMBER, min: NUMBER, sec: NUMBER)TEXT

  Constructs a time object with the provided hour, minute, and second values, presenting the time in the standard "hour:minute:second" format.

  • Example:time(14, 50, 23)14:50:23
• hour()NUMBER

  Retrieves and returns the hour component of a given time in a 24-hour format. This function takes a time value as input and extracts the hour part, providing it as a numerical value.

  • Example:hour("17:44:30")17
• minute()NUMBER

  Extracts and returns the minute component of a given time in a 24-hour format. This function takes a time value as input and retrieves the minute part, providing it as a numerical value.

  • Example:minute("17:44:30")44
• second()NUMBER

  Retrieves and returns the second component of a given time in a 24-hour format. This function takes a time value as input and extracts the second part, providing it as a numerical value.

  • Example:second("17:44:30")30
• diffTime()NUMBER

  Calculates the difference between two points in time, typically represented as hours, minutes, and seconds. This function takes two time values as input and calculates the time duration or time interval between them, providing the result in hours, minutes, and/or seconds.

  • Example:diffTime("17:45:30", "18:45:30", "H")1
  • Example:diffTime("17:45:30", "18:45:30", "M")60
  • Example:diffTime("17:45:30", "18:45:30", "S")3600
• formatTime()TEXT

  Transforms a time value into a human-readable string representation, following a specified format pattern. This function accepts a time value as input and returns a formatted string that conforms to the provided format pattern.

  • Example:formatTime("11:44:30", "HHa")11am
  • Example:formatTime("11:44:30", "HHam mm")11am 44
  • Example:formatTime("11:44:30", "hh:mm a")11:40 am
• dateNow()TEXT

  Retrieves and returns the current date at the moment of execution.

  • Example:dateNow()2023-09-22
• date(year: NUMBER, month: NUMBER, day: NUMBER)TEXT

  Is employed to construct a date object with the provided year, month, and day values, yielding the date in the standard "year-month-day" format.

  • Example:date(2014, 12, 8)2014-12-08
• year()NUMBER

  Extracts and returns the year component from a date string in the "year-month-day" format. This function takes a date value as input and retrieves the year part as a numerical value.

  • Example:year("2014-12-08")2014
• month()NUMBER

  Extracts and returns the month component from a date string in the "year-month-day" format. This function takes a date value as input and retrieves the month part as a numerical value.

  • Example:month("2014-12-08")12
• day()NUMBER

  Extracts and returns the day component from a date string in the "year-month-day" format. This function takes a date value as input and retrieves the day part as a numerical value.

  • Example:day("2014-12-08")8
• diffDate()NUMBER

  This function calculates the difference between two dates and returns it as a numerical value based on a specified time unit ("Y" for years, "M" for months, or "D" for days). The functions also include "YD" for years and days, "YM" for years and months, and "MD" for months and days, providing more granular differences between two dates by focusing on specific components within the span of the overall result. Note: When using the diffDate("from", "to", "format") function, if the "to" date is earlier than the "from" date, it will output -1.

  • Example:diffDate("1973-02-24", "1969-05-16", "Y")-1
  • Example:diffDate("1973-02-24", "1969-05-16", "M")-1
  • Example:diffDate("1973-02-24", "1969-05-16", "D")-1
  • Example:diffDate("1969-05-16", "1973-02-24", "Y")3
  • Example:diffDate("1969-05-16", "1973-02-24", "M")45
  • Example:diffDate("1969-05-16", "1973-02-24", "D")1380
  • Example:diffDate("1969-05-16", "1973-02-24", "MD")8
  • Example:diffDate("2023-01-01", "2023-02-10", "MD")9
  • Example:diffDate("1969-05-16", "1973-02-24", "YM")9
  • Example:diffDate("1969-05-16", "1973-02-24", "YD")284
  • Example:diffDate("2023-01-01", "2023-02-10", "YD")40
• formatDate()TEXT

  Takes a date value and a format string as input and returns a formatted date string according to the provided pattern.

  • Example:formatDate("2023-06-01", "DD/MM/YYYY")01/06/2023
  • Example:formatDate("2023-06-01", "YYYY MMMM dddd")2023 June Thursday
  • Example:formatDate("2023-06-01", "MMM DD, YY")Jun 01, 23
• epochtodate(timestamp: NUMBER)TEXT

  Is used to convert a Unix epoch timestamp in milliseconds to a DateTime representation in UTC (Universal Time Coordinated). The function is invoked with the format $epochToDate(timestamp: NUMBER), where timestamp represents a Unix epoch timestamp in milliseconds.

  • Example:epochtodate(0)1970-01-01T00:00:00Z
  • Example:epochtodate(-1)1969-12-31T23:59:59.999Z
  • Example:epochtodate(1)1970-01-01T00:00:00.001Z
  • Example:epochtodate(1655908429662)2022-06-22T14:33:49.662Z
• epochtodate(timestamp: NUMBER, format: TEXT)TEXT

  Enables the formatting of Unix timestamps into human-readable date and time representations. It accepts a Unix timestamp in milliseconds as the timestamp parameter and an optional format parameter to specify the desired output format.

  • Example:epochtodate(1695316200000)2023-09-21T17:10:00Z
  • Example:epochtodate(1695316200000, "hh:mm")17:10